Refinishing the B1500!

Discussion of B3 Brewing Sculptures. How to best use your B3 brewing system, what the options are like, anything to do with the systems.

Moderator: Moderator Team

Refinishing the B1500!

Postby mrrrkva » Sun Dec 04, 2011 7:45 pm

Ive gotten lots of good brews out of my beer Sculpture! Now its time to redo her finish...... What do you recommend? I have the black one, not the stainless..... Anyone have recomendations on the TYPE of paint, and the color? Also what about Preperation before I paint it.... I do have some VERY light surface rust.... NO CORROSION.... SHE is just do for a REFRESH...
mrrrkva
Taster Glass (2 posts)
 
Posts: 2
Joined: Sun Dec 04, 2011 7:41 pm

Re: Refinishing the B1500!

Postby jeeper » Sun Dec 04, 2011 8:07 pm

The hot ticket is powder coating. Much more durable than any paint. Sand blasting is part of the process so any surface rust isn't a problem. Thats my plan for my garage built stand and grain mill, just haven't gone around to it. Its a little bit pricey, but most shops will offer big discounts if you can wait for bigger "runs" of the same color.
Jeff
User avatar
jeeper
Barrel (1000 posts)
 
Posts: 1342
Joined: Fri Mar 16, 2007 5:55 am
Location: Menifee Ca.

Re: Refinishing the B1500!

Postby turbo_ale » Sun Dec 04, 2011 8:14 pm

Sandblasting & powder coating would be my choice, and so many colors to choose from.

http://www.google.com/search?q=powder+c ... 32&bih=913
ON TAP:
1. 1C
2. 4B
3.
4.
5.
6.
Bottled: Gewurztraminer, Pinot Noir, Cabernet Sauvignon, 16B, 18B, 18E, 19B, 20, 21A, 23, 27
Fermenting:
Next: 5C

BEER, a mixture of malted grains, water, hops and yeast, that is transformed through the course of fermentation that transcends the simplicity of those basic ingredients, fundamentally into the drink of life.
turbo_ale
User avatar
turbo_ale
Micro Brewery (2500 posts)
 
Posts: 2703
Joined: Sun Sep 12, 2010 1:18 pm
Location: Colorado Springs, CO

Re: Refinishing the B1500!

Postby clamflats » Tue Dec 06, 2011 8:14 pm

you have to use high temp powder coat or it burns. I use john deere muffler paint
clamflats
Taster Glass (2 posts)
 
Posts: 21
Joined: Thu Sep 02, 2010 6:02 pm

Re: Refinishing the B1500!

Postby Dreccentric » Mon Jan 02, 2012 2:47 pm

use high temp spray paint, oreilly auto carries a lot of colors in both 500 F and 700F
also use rustloeum on any welds prior to painting to catalyze any rust
Dreccentric
Empty Glass (<2 posts)
 
Posts: 1
Joined: Mon Jan 02, 2012 2:44 pm

Re: Refinishing the B1500!

Postby DCBC » Thu Feb 09, 2012 1:45 pm

High temp stove paint is what I used. Good up to 1,200 degrees. Get the glossy. The flat has a lot of residue for some reason.
User avatar
DCBC
Taster Glass (2 posts)
 
Posts: 20
Joined: Thu Jul 31, 2008 9:41 am

Re: Refinishing the B1500!

Postby daffodil1003 » Thu Jun 07, 2012 2:07 am

turbo_ale wrote:Sandblasting & powder coating would be my choice, and so many colors to choose from.

http://www.google.com/search?q=powder+c ... 32&bih=913


Such a very amazing link!

__________________
Watch What to Expect When You’re Expecting Online Free
daffodil1003
Empty Glass (<2 posts)
 
Posts: 1
Joined: Thu Jun 07, 2012 2:01 am

Re: Refinishing the B1500!

Postby Monster Mash » Thu Jun 07, 2012 8:22 am

High temp paint is not flame resistant so it will burn off where the burner is, I'm not sure about powder coating.
User avatar
Monster Mash
Post Whore (10000 posts)
 
Posts: 14357
Joined: Tue Mar 09, 2004 2:15 pm
Location: Castaic, CA


Return to Brewing Sculptures

Who is online

Users browsing this forum: No registered users and 4 guests