Discussion of B3 Brewing Sculptures. How to best use your B3 brewing system, what the options are like, anything to do with the systems.
Moderator: Moderator Team
There is a guy the next town over who can weld some fittings on my kegs. He quoted me $10 per inch a reasonable price to pay.
Work Hard, Rock Hard, Eat Hard, Sleep Hard, Grow Big, Wear Glasses if you need 'em "Web Wilder"
- Addict (5000 posts)
- Posts: 7065
- Joined: Thu Mar 03, 2005 1:48 pm
- Location: Sykesville Md
See if he will do it for $10 per fitting if you drill the holes. $20 per fitting isn't a bad deal either but if you want him to drill the holes then expect to pay $30+.
I paid $30 per pot and each one had 3 fittings but I drilled and filed the holes myself.
- Post Whore (10000 posts)
- Posts: 14357
- Joined: Tue Mar 09, 2004 2:15 pm
- Location: Castaic, CA
This is fixed simply by resting it over the boil kettle. The worst one is the shorter lengths. When set up as is in the photos of their manual, they are too short. So, I move the exchanger all the way to the side, yet the small hose leading to the inlet of the pump still crimps closed. It looks like I may need either an elbow at that point, as it is at the bottom of the pump, or a longer hose. Suggestions?
- Empty Glass (<2 posts)
- Posts: 1
- Joined: Fri Apr 10, 2015 3:10 am
Return to Brewing Sculptures
Who is online
Users browsing this forum: No registered users and 3 guests